Six Stage Relay Module
IOR6
£53.00
Description
This IO module is used with DDCs to convert an analogue control output to a staged, reverse staged or sequenced relay output. LEDs indicate correct operation and low current draw from 0-10Vdc controller means that the IOR6 can work successfully with most BEMs controllers.
Specification
Input Signal: 0-10Vdc 1mA min. into 22kΩ impedance
Output Contacts: 8A at 230Vac (resistive load)
Power Supply: 24Vac ± 15% @ 50Hz or 24Vdc +15%/-6%, 90mA max.
Hysteresis: ± 0.2Vdc about switching points (± 0.1Vdc in binary)
Operating Modes: Staged, Reverse Staged, Sequenced
Manual Override: On/Off/Auto jumper selectable
Electrical Terminals: Rising cage connectors for 0.5-2.5mm² wire.
Operating Temp.: -10°C to +40°C, RH 0-80% non-condensing
Dimensions: 52(H) x 116(W) x 83(D)mm
Weight | 224 g |
---|