Two Stage Relay Module

IOR2

£29.00

Description

This IO module is used with DDCs to convert an analogue control output signal to a time proportional raise/lower, high/low or binary relay output. Typically it is used to control valve and damper actuators from an analogue signal.

It is designed so that every status is clearly indicated with LEDs to facilitate operation and commissioning.

 

Specification

Input:                                       0 – 10Vdc 1mA min into 22KΩ impedance.

Output:                                  8Amp @230Vac (resistive)

Supply Voltage:                 24Vac/dc +/- 10%

Operating Modes:           Binary, Sequenced, Staged, Aux/ RL

Termination:                        Rising clamp for 0.5 to 2.5mm² cable.

Ambient:                               -10 to +40°C

Dimensions:                         58(W) x 50(D)x 76(H)mm

Weight 112 g
Specification Guide