Characterised 20mm 2 Port Valve Kvs 6.3 – Suitable Actuators LR../LRF..

R2020-6P3-S2

£85.10

Description

Belimo Ball Valves, shut off and Characterised control valves with internal thread fitting for use on warm and cold water systems, bubble tight shut off.

The Control Ball Valves guarantee an equal percentage valve characteristic and first class control characteristics with their unique characterising disc.

The Control Ball Valves from Belimo Automation have set new standards for effective control since their introduction in 1999; tried-and-tested more than 2.5 million times they provide a cost-effective and innovative solution to conventional control valves.

Use the S2 Actuator with the Valve.

R2020-6P3-S2-UKCA

Specification

Media:                                                   Cold and warm water, water with glycol up to max.

                      50% vol.

Medium Temperature:               -10…120°C

Medium Temperature Note:    The allowed media temperature can be limited,

                       depending on the type of actuator. Limitations

                        can be found in the respective data sheets of the

                        actuators.

Rated Pressure ps:                           1600 kPa

Closing Pressure ∆ps:                     1400 kPa

Differential Pressure ∆pmax.:   350 kPa

Differential Pressure Note:         200 kPa for low-noise operation.

Flow Characteristic:                         Equal percentage (VDI/VDE 2178), optimised

           in the opening range.

Leakage Rate:                                        Leakage rate A, air-bubble tight (EN 12266-1)

Pipe Connectors:                                 Internal thread according to ISO 7-1

Angle of Rotation:                              90° (Operating range 15…90°)

Weight 420 g
Specification Guide