Relay and IO Modules
10 channel alarm integrator module 230Vac
IO-ALM10-230
The IO-ALM10 series of Alarm Integrators monitor up to 10 Input Channels and provide a relay output in the event of…
10 channel alarm integrator module 24Vac/dc
IO-ALM10-24
The IO-ALM10 series of Alarm Integrators monitor up to 10 Input Channels and provide a relay output in the event of…
10Vdc Single Relay and Base
IOR1-10DC
The IOR1 range of single relay modules are suitable for a wide range of voltages and are supplied complete with DIN rail…
12Vac/dc 6mm Relay Module
RM1-6MM-12
These relay modules are available in 3 voltages and ideal when space is limited as they are only 6mm wide.…
230Vac Single Relay and Base
IOR1-230AC
The IOR1 range of single relay modules are suitable for a wide range of voltages and are supplied complete with DIN rail…
230Vac/dc 6mm Relay Module
RM1-6MM-230
These relay modules are available in 3 voltages and ideal when space is limited as they are only 6mm wide.…
24 Vac/dc 6mm Relay Module
RM1-6MM-24
These relay modules are available in 3 voltages and ideal when space is limited as they are only 6mm wide.…
24Vac Single Relay and Base
IOR1-24AC
The IOR1 range of single relay modules are suitable for a wide range of voltages and are supplied complete with DIN rail…
24Vdc Single Relay and Base
IOR1-24DC
The IOR1 range of single relay modules are suitable for a wide range of voltages and are supplied complete with DIN rail…
Adjustable Relay Module
NP-NRM-10
The NORPOSH NRM-10 is a Digital, advanced in features, compact and economical adjustable relay module. It takes 0-10VDC input and…
Adjustable Single Relay Module
IOVR1
The IOVRI is a SPCO change over relay. output from a 0 to 10Vdc with fully adjustable switch point.
Analogue Rescaling Module
ARM
The ARM analogue rescaling module accepts voltage or current inputs and rescales them to voltage or current outputs. A range…
Analogue to 20 Relay Card
IOAD20
The IOAD20 has been designed primarily for fault indication of up to 20 alarms from 1 analogue signal.It provides 20…
Dual Phase Cut Module 30VA per channel
IOPC2
The IOPC2 converts two 0-10V dc Input Signals to drive two separate 0-20V 50Hz phase-cut outputs, at 30VA per channel…
Eight Stage Relay Module
IOR8
This IO module is used with DDCs to convert an analogue control output to a staged, reverse staged or sequenced…
Electro-pneumatic Converter
IOEPC
The IOEPC is an electric to pneumatic transducer which converts an analogue input signal to a proportional pneumatic output. The unit…
Four Channel Digital Input Multiplexer – VFC input
IOD4
The Digital Input Expander allows 4 volt free inputs to be monitored by a single analogue input channel. The resultant analogue value can be decoded…
Four Channel Override Relay Module
IOMR4
The IOMR4 is designed for applications which require independent manual override of digital output channels from BMS Controllers. The outputs can…
Four Stage Relay Module
IOR4
The IOR4 is intended for use with BMS controllers to convert an analogue control output to a binary, staged or…