Characterised 32mm 3 Port Valve Kvs 16 – Suitable Actuators NR../NRF..

R3032-16-S3

£257.00

Description

Belimo Ball Valves, shut off and Characterised control valves with internal thread fitting for use on warm and cold water systems, bubble tight shut off.

The Control Ball Valves guarantee an equal percentage valve characteristic and first class control characteristics with their unique characterising disc.

The Control Ball Valves from Belimo Automation have set new standards for effective control since their introduction in 1999; tried-and-tested more than 2.5 million times they provide a cost-effective and innovative solution to conventional control valves.

Use the S3 Actuator with this Valve.

R3032-16-S3-UKCA

Specification

Media:                                                   Cold and warm water, water with glycol up to max.

                      50% vol.

Medium Temperature:               -10…120°C

Medium Temperature Note:    The allowed media temperature can be limited,

                       depending on the type of actuator. Limitations

                       can be found in the respective data sheets of the

                        actuators.

Rated Pressure ps:                          1600 kPa

Closing Pressure ∆ps:                    1400 kPa

Differential Pressure ∆pmax.:  350 kPa

Differential Pressure Note:        200 kPa for low-noise operation.

Flow Rate:                                               Bypass B – AB: 70% of kvs value

Flow Characteristic:                         Control path A – AB: equal percentage (VDI/

           VDE 2178), optimised in the opening range,

           Bypass B – AB: linear (VDI/VDE 2178).

Leakage Rate:                                        Control path A – AB: Leakage rate A, air-bubble

            tight (EN 12266-1), Bypass B – AB: Leakage

            class I (EN 1349 and EN 60534-4) approx.

            1…2% of the kvs value, with respect to the

             largest value within the DN.

Pipe Connectors:                                   Internal thread according to ISO 7-1

Angle of Rotation:                                90° (Operating range control path A – AB

                             15…90°, Bypass B – AB 15…70°)

Weight 950 g
Specification Guide