Switch Mode Power Supply 24Vdc




The HDR-60 is an economical ultra slim 60W DIN rail power supply, suitable to be installed on TS-35/7.5 OR TS-35/15 mounting rails. The body is designed 52.5mm(3SU) in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 85Vac to 264Vac (277Vac operational) and conforms to EN61000-3-2.

  • No load power consumption <0.3W.
  • Isolation class II.
  • Pass LPS (Limited power source).
  • DC output voltage adjustable.
  • Protections: Short circuit / Overload / Over voltage.
  • Cooling by free air convection (working temperature: -30 ~ +70˚C).
  • DIN rail TS-35/7.5 or 15 mountable.
  • Over voltage category III.
  • LED indicator for power on.



DC Voltage:                             24V

Rated Current:                      2.5A

Current Range:                      0 – 2.5A

Rated Power:                          60W

Ripple & Noise (max.):       150mVp-p

Voltage Adj. Range:             21.6 ~ 29V

Voltage Tolerance:               ± 1.0%

Line Regulation:                     ± 1.0%

Load Regulation:                    ± 1.0%

Setup, Rise Time:                   500ms, 50ms/230Vac

             500ms, 50ms/115Vac at full load

Hold Up Time (Typ.):            30ms/230Vac

             12ms/115Vac at full load

Weight 150 g
Specification Guide